Membrane pressure adhesive is a two-component adhesive with an activation temperature of around 60 ℃. The storage environment temperature must be between 5 ℃ -30 ℃, and temperatures below 5 ℃ can cause flocculation. The rubber bucket should not be placed directly on the ground, but on wooden brackets, especially in winter. The validity period of the film pressure adhesive is 6 months from the date of leaving the factory, without disassembling the original packaging.
The main agent for film pressure adhesive preparation ratio is curing agent=20:1. When mixing the main agent with the curing agent, the main agent should be kept in a stirring state, and the curing agent should be slowly added and stirred for at least 3 minutes. The amount of glue prepared each time should be ensured to be used up within 4 hours. After mixing the glue, the glue bucket should be tightly covered.